UPC: 0044861005330 | Climax Metal 2C-062-KW Two-Piece Clamping Collar With Keyway Black Oxide Plating Steel 5/8 Bore 1-5/16 OD 7/16 Width

UPC lookup results for: 0044861005330 | Climax Metal 2C-062-KW Two-Piece Clamping Collar With Keyway Black Oxide Plating Steel 5/8 Bore 1-5/16 OD 7/16 Width

This Climax Metal two-piece clamping shaft collar has a keyway and is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. This collar has a keyway for use on keyed shafts. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion chipping and flaking and stick-slip of the screw during torqueing improving the collar s grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This shaft collar is suitable for use in various applications including in the automotive industry to situate components in automobile power steering assemblies the manufacturing industry to locate components on a conveyor belt system and the hobby craft industry to hold wheels on axles in remote control vehicles among others. Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators mechanical stops and spacers between other components. The two basic types of shaft collars are clamping (or split) collars which come in one- or two-piece designs and setscrew collars. In both types one or more screws hold the collars in place on the shaft. In setscrew collars screws are tightened through the collar until they press directly against the shaft and in clamping collars screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft while two-piece clamping collars separate into two halves and can be installed between components on the shaft. Shaft collars are made from a wide range of materials including zinc-plated steel aluminum nylon and neoprene. Found in nearly every type of machinery and industry shaft collars are used in applications including gearbox assemblies motor bases machine tools drive shafts agricultural implements medical equipment and paper and steel mill equipment among others. Climax Metal Products Company (CLIMAX) manufactures shaft collars rigid couplings keyless locking devices pulleys keyless bushings and bearings for the power transmission industry and industrial maintenance repair and operations (MRO) markets. The company founded in 1946 and headquartered in Mentor OH meets International Organization for Standardization (ISO) 9001:2008 quality assurance standards.